Liquid Sealant for Water & Gas 50g

BOSTON Liquid Thread Sealant is an anaerobic sealant, designed to seal metal threads on gas and water pipes.
APPLICATION: Remove oil contamination from the area where the sealant is to be applied. Apply sealant to one surface, covering 2-3 thread rotations and connect threads. Excess sealant must be wiped off. Curing time is 10-20 minutes, however full cure time is 24 hours. Hand tools required for disassembly.
IMPORTANT: Anaerobic sealants seal through lack of oxygen. 50g sealant enclosed, packaging is larger to prevent in-bottle curing. Sealant exposed to air will not cure. Metal to metal use only. Not suitable for plastic, glass or rubber. Excess sealant must be wiped off to prevent a metallic taste from uncured sealant. Not recommended for continuous steam temperatures above 135°C. Apply this product with good ventilation. If product comes into contact with eyes or skin, flush with clean water immediately. Store in a cool, dry area. Keep away from children.
Net: 50g Approved by the Aust. Gas Assoc.(Cert. No. 7583 Class III – 2000kPA).
Temp. Range: -10°C to +135°C (Gas). Up to 55°C (Water). Type Tested AS/NZS 4020 PTT40067 SAI GLOBAL.